Various SNMP versions¶

Multiple SNMP USM users¶

Listen and respond to SNMP GET/SET/GETNEXT/GETBULK queries with the following options:

SNMPv3
with USM user ‘usr-md5-des’, auth: MD5, priv DES or with USM user ‘usr-sha-none’, auth: SHA, no privacy with USM user ‘usr-sha-aes128’, auth: SHA, priv AES
allow access to SNMPv2-MIB objects (1.3.6.1.2.1)
over IPv4/UDP, listening at 127.0.0.1:161

Either of the following Net-SNMP commands will walk this Agent:

$ snmpwalk -v3 -u usr-md5-des -l authPriv -A authkey1 -X privkey1 localhost .1.3.6
$ snmpwalk -v3 -u usr-sha-none -l authNoPriv -a SHA -A authkey1 localhost .1.3.6
$ snmpwalk -v3 -u usr-sha-aes128 -l authPriv -a SHA -A authkey1 -x AES -X privkey1 localhost .1.3.6

from pysnmp.entity import engine, config
from pysnmp.entity.rfc3413 import cmdrsp, context
from pysnmp.carrier.asyncio.dgram import udp

# Create SNMP engine
snmpEngine = engine.SnmpEngine()

# Transport setup

# UDP over IPv4
config.add_transport(
    snmpEngine, udp.DOMAIN_NAME, udp.UdpTransport().open_server_mode(("127.0.0.1", 161))
)

# SNMPv3/USM setup

# user: usr-md5-des, auth: MD5, priv DES
config.add_v3_user(
    snmpEngine,
    "usr-md5-des",
    config.USM_AUTH_HMAC96_MD5,
    "authkey1",
    config.USM_PRIV_CBC56_DES,
    "privkey1",
)
# user: usr-sha-none, auth: SHA, priv NONE
config.add_v3_user(snmpEngine, "usr-sha-none", config.USM_AUTH_HMAC96_SHA, "authkey1")
# user: usr-sha-aes128, auth: SHA, priv AES
config.add_v3_user(
    snmpEngine,
    "usr-sha-aes128",
    config.USM_AUTH_HMAC96_SHA,
    "authkey1",
    config.USM_PRIV_CFB128_AES,
    "privkey1",
)

# Allow full MIB access for each user at VACM
config.add_vacm_user(
    snmpEngine, 3, "usr-md5-des", "authPriv", (1, 3, 6, 1, 2, 1), (1, 3, 6, 1, 2, 1)
)
config.add_vacm_user(
    snmpEngine, 3, "usr-sha-none", "authNoPriv", (1, 3, 6, 1, 2, 1), (1, 3, 6, 1, 2, 1)
)
config.add_vacm_user(
    snmpEngine, 3, "usr-sha-aes128", "authPriv", (1, 3, 6, 1, 2, 1), (1, 3, 6, 1, 2, 1)
)

# Get default SNMP context this SNMP engine serves
snmpContext = context.SnmpContext(snmpEngine)

# Register SNMP Applications at the SNMP engine for particular SNMP context
cmdrsp.GetCommandResponder(snmpEngine, snmpContext)
cmdrsp.SetCommandResponder(snmpEngine, snmpContext)
cmdrsp.NextCommandResponder(snmpEngine, snmpContext)
cmdrsp.BulkCommandResponder(snmpEngine, snmpContext)

# Register an imaginary never-ending job to keep I/O dispatcher running forever
snmpEngine.transport_dispatcher.job_started(1)

# Run I/O dispatcher which would receive queries and send responses
try:
    snmpEngine.open_dispatcher()
except:
    snmpEngine.close_dispatcher()
    raise

Download script.